Font Function - Brother P-touch 1950 Mode D'emploi

With the Font function, you can choose one of two fonts for your text.
The following font settings are available:
The default font setting is FONT 1. The font indicator at the bottom left of the display shows
the currently selected font setting.
To change the font setting:
1 While holding down c, press 1 once, and keep c held down to display the
current font setting.
2 While still holding down c, continue pressing 1 until the desired font setting is
displayed.

The current font setting is shown by the font indicator at the bottom left of the dis-
play.
3 Release c to apply the selected font setting to the entire text.
EXAMPLE
To select the FONT 2 font setting:
1
While holding down
and keep
2
While still holding down
1
until FONT 2 is displayed.
c
3
Release
26

FONT FUNCTION

c
, press
c
held down.
c
.
1
once,
, continue pressing
F O N T
1
F O N T
A
2