Chronograph - BREIL CHRONO Mode D'emploi

C

CHRONOGRAPH

• Press to start the chronograph.
• Press to stop the chronograph measurement.
• Press to reset the chronograph.
To use the chronograph in sequence without including the intervals between the events,
adding the times together:
• Press to start the chronograph.
• Press once more to stop the chronograph and register the measurement.
• Proceed in the same way for all subsequent measurements.
• When finished, the chronograph will display the total time for all events (without the
interruptions between them) and the individual times measured.
• Press to reset the chronograph.
To measure the times of a single event and simultaneously display intermediate times:
• Press to start the chronograph.
• Press to measure the first intermediate time. The chronograph continues the
measurement even during the display of intermediate times.
• Press once more. The chronograph hands will recover the lost time and continue
the measurements from the beginning of the previous one.
• Repeat the operation to obtain the next intermediate times.
• Press to display the total time.
• Press B to reset the chronograph.
4