Switching To Chronograph Mode - BREIL 3S10 Mode D'emploi

• Resetting the alarm time
Rotate the crown
backwards. T urning the crown rapidly also increases the speed of the adjustment. T o
stop the fast resetting motion, turn the crown slowly . By turning the crown slowly, the
adjustment is carried out in steps of one minute.
• Switching from alarm time to normal time
When the crown
anticlockwise and stops to indicate the minutes of the current hour. A confirmation
"bip" is heard.
Alarm ON/OFF
Pulling the alarm button out activates the alarm (ON), pressing it back in de-activates it
(OFF). Pushing the button also stops the alarm when sounding.
* When the alarm is set, it goes off twice a day (a.m. and p.m.) for 20 seconds
each time.
D

SWITCHING TO CHRONOGRAPH MODE

• If button is pressed while the watch is in normal time mode, a confirmation "bip" is
heard. The second hand moves rapidly to 0 and the watch is in chronograph mode.
• If button is pressed while the watch is in chronograph mode, a confirmation "bip" is
heard. The watch has returned to normal time mode.
4
anticlockwise to advance the hands and clockwise to move them
is moved to its normal position, the minute hand moves rapidly