LEXIBOOK DJ053 Série Mode D'emploi page 34

2. You may need to move closer to your subject or your subject may need to move
to a lighter area.
3. Your exposure or white balance settings may be incorrect for your environment.
See the 'Menu Settings' section for how to change these settings.
Q: Why are my pictures too light?
A:
1. You may not need the flash function. See the 'Taking Photos' section for how to
change the flash setting.
2. Your exposure or white balance may be incorrect for your environment. See the
'Menu Settings' section for how to change these settings.
Q: What do I do when a memory card error message appears?
A:
Check the memory card instruction manual to make sure it is compatible and has
been correctly formatted for your camera.
Q: I have taken photos but my computer does not recognize my camera. What
do I do?
A:
1. Ensure that you have in fact taken photos. Press SHUTTER a few times to take
some sample photos and then try downloading them again.
2. Always use the USB cable that came with the camera. Make sure it is firmly
connected to the camera and the computer.
3. Give your computer time to recognize the USB connection device. Try refreshing
the device options list until you see the removable device appearing.
If the computer does not recognize your device, check the 'Specifications'
section to see if your computer meets the system requirements.
34