Skil BL4714B-00 Guide D'utilisation page 12

To remove the tube, press and hold down the tube-release button and then pull the tube
•
straight from the blower (Fig. 4).
To remove the nozzle, depress the lock lever and pull the nozzle straight from the tube
•
(Fig. 5).
Fig. 4
To Start/Stop the Blower
NOTICE: Before switching on the blower, en-
sure that it is not in contact with any object.
Turn the on/off dial to position "1" to switch
•
the blower ON (Fig. 6).
The air flow control can be adjusted from 1
•
to Max (maximum) by turning the dial wheel.
Adjust the speed to suit the task at hand.
Turn the dial wheel to "0" position to switch
•
off the blower. After switching off the blower
the motor continues to run for a few seconds.
WARNING
blower during work breaks and after
finishing work.
12
Always remove the
battery pack from the
Fig. 5
Fig. 6
On/Off Dial