Skil BL4714B-00 Guide D'utilisation page 11

To Attach/Detach Battery Pack
(Fig . 1)
WARNING
Therefore, remove the battery when
assembling parts, making adjustments,
cleaning, when the tool is not in use, or
when carrying it at your side . Removing the
battery pack will prevent accidental starting
that could cause serious personal injury .
To attach the battery pack:
Align the ribs of the battery pack with the
•
mounting slots in the blower's battery port.
Press the battery pack toward the blower
•
body until it snaps into position.
NOTICE: Make sure that the battery pack is secured to the blower before beginning operation.
NOTICE: When placing the battery pack onto the tool, be sure that the raised rib on the
battery pack aligns with the groove inside the tool and that the latches snap into place
properly. Improper attachment of the battery pack can cause damage to internal components.
To detach the battery pack:
Depress the battery-release button located on the front of the battery pack to release the
battery pack. Pull the battery pack out and remove it from the tool.
To Assemble the Blower Tube
Align the groove in the tube with the knob on the blower housing. Push the tube onto the
•
blower housing until it snaps into place (Fig. 2). Pull on the tube to ensure that it is securely
attached to the blower.
Align the lock lever of the nozzle with the knob on the tube. Push the nozzle onto tube until it
•
snaps into place (Fig. 3).
Fig. 2
Tube-Release
Button
Battery tools are always
in operating condition .
Knob
Fig. 1
Battery-Release Button
Fig. 3
Detach
Attach
11