Tectro TP 020 Manuel D'utilisation page 67

50
cm.
50 cm.
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
B
INSTALLATION
WARNING
• Before using the air conditioner it should be left in an upright
position for at least 2 hours.
• Ensure that the air outlet on the front of the unit
when the machine is in operation. If it is closed while the machine is
in operation this may damage the machine. The correct use of the
airconditioner is the responsibility of the user.
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
1 Ensure that the unit is positioned upright and on a level surface.
2 Do not operate the unit inside the bathroom, shower, or in any other very
humid environment.
3 Please keep a distance of 50 cm between the unit and the wall or other
objects to ensure proper air circulation.
4 Insert both ends of the air exhaust hose
the connectors by turning them clockwise onto the hose.
5 The hose connector
unit. Attach the second hose connector
Push the window feed-through
with the supplied foam sealing sections ¹. Cut these to size if necessary.
in the round connectors
must be attached to the air outlet
to the window feed-through (14).
out of an open window and seal the gap
is always open
. Fasten
at the back of the
4
67