Sony alpha HVL-MT24AM Mode D'emploi page 23

1
Set the POWER switch of the camera to ON and select A or
M mode.
2
Press the flash ON/OFF button to turn on the flash-ON
lamp on the control panel.
3
Focus your subject and check the magnification ratio.
You can check the magnification ratio with the magnification ratio scale on
the lens. (The location of the magnification ratio scale differs depending on
the lens.)
4
When using M mode, select a shutter speed.
You cannot select the shutter speed faster than the camera's sync speed.
5
Select the aperture.
To find the correct aperture number, refer to pages 26 to 29.
Continued on the next page