Husqvarna 540i XP Manuel D'utilisation page 21

in the saw chain and prevent safe
operation of the product.
Note:
If it is necessary, cut the limbs piece by piece.
Cut the smaller branches (A) and (B) before you cut
the limb near the trunk (C).
1. Remove the limbs on the right side of the trunk.
a) Keep the guide bar on the right side of the trunk
and keep the body of the product against the
trunk.
b) Select the applicable cutting technique for the
tension in the branch.
WARNING:
about how to cut the branch, speak
to a professional chainsaw operator
before you continue.
2. Remove the limbs on the top of the trunk.
a) Keep the product on the trunk and let the guide
bar move along the trunk.
1065 - 005 - 29.06.2020
A
B
C
If you are not sure
b) Cut on the push stroke.
3. Remove the limbs on the left side of the trunk.
a) Select the applicable cutting technique for the
tension in the branch.
WARNING:
about how to cut the branch, speak
to a professional chainsaw operator
before you continue.
To cut trees and branches that are in tension
Refer to
on page 24 for instructions on how to cut branches
that are in tension.
To use the tree felling technique
WARNING:
experience to fell a tree. If possible,
engage in a training course in chainsaw
operation. Speak to an operator with
experience for more knowledge.
If you are not sure
You must have
21