Additional functions
Pyrolytic self-cleaning
Notes
To defrost large portions of food, you can remove the guide rails and place the container on the
cooking chamber floor.
2.
To preheat dishes, remove the guide rails and select the "Hot air grill" and "Circulation" modes
with a temperature of 50 °C. "Hot air grill" mode should be used if more than half of the cooking
chamber floor is covered with the dishes.
3.
In "Circulation" mode, the fan switches on at certain times during the heating process to ensure
optimum heat distribution in the cooking chamber.
Caution
1.
If you open the appliance door while a process is running, the process will be stopped. In this
case there is a risk of burns!
2.
Do not cover the ventilation slots. This may cause the unit to overheat.
To make the unit cool down faster, the fan may continue to run for a while.
Fan
The fan switches on and off as required. Hot air escapes above the door.
USING YOUR APPLIANCE
Cooking with the oven
1.
After the oven is plugged in electrically, tap the "Oven function" symbol to select functions and
use the Smart Slider or the "+/-" keys to set the cooking temperature.
2.
Tap the
symbol. The oven will start working. If you do not tap the symbol, the oven will
display the time again after 5 minutes.
3.
If you tap
during the cooking process, the process will be cancelled, and if you tap
will be paused.
NOTE: After setting the temperature, tap the clock symbol
Temperature
The oven heats up to a very high temperature.
Not adjustable
This may result in the burning of any residues.
10
Use
to set the cooking time.
, it