gala gar SMART 200 MP SYNER Manuel D'instruction page 21

SMART 200 MP SYNER
3. COMMISSIONING. OPERATION AND SETTINGS.
3.1. CONTROL AND CONNECTION ELEMENTS.
Once the electrical power supply installation has been completed, the equipment can be commissioned. This section
describes the control and regulation system of the SMART 200 MP SYNER unit.
Description of use.
A Digital LED display.
B Euroconnector for MIG torch.
C SPOOL GUN MODE / STANDARD MODE switch.
Spool gun connector. 2-way male circular type
D
Pin 1: +V motor. Pin 2: -V motor.
E
Welding connector, positive pole
F Polarity change.
G
Welding connector, negative pole
H
Gas inlet for MIG welding. Spigot for tube ø 6 mm inside.
I
Power cable.
J
Switch 0/I.
K
Fan.
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA |
. Type Dinse 35-50mm
2
. Type Dinse 35-50mm
21/64
.
2 .
www.galagar.com