gala gar SMART 200 MP SYNER Manuel D'instruction page 19

SMART 200 MP SYNER
1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The SMART 200 MP SYNER is a synergic portable multi-process arc welding machine with single-phase dual voltage
power supply, with automatic detection of the input voltage 110 / 220-230V. Based on inverter technology, it features
high energy efficiency, high performance and low weight, which makes it ideal for mobile work.
MIG/MAG, MMA and DC TIG processes with Lift Arc arc ignition. Offers excellent arc stability in both MIX (Ar-CO
and CO programmes. Digital control panel with high visibility LED display. 2T/4T/SPOT torch mode, ready to use reel
2
torches. Hot Start, Arc Force, Anti-Stick, Lift Arc, Inductance Control, Approach Speed, Post-Gas Time and Spot Welding
Time functions are available .
Technical Characteristics
Reference
Input voltage U
Maximum input current I
Effective input current I
Maximum apparent power S
Effective apparent power S
Technology Power supply
Efficiency
Welding processes
Regulation range U
Regulation range wire speed v
Regulation range I
Regulation range I
No-load voltage
Welding current (I
Duty factor 40ºC MIG/MAG/TIG
Ventilation
Applicable thread Ø
Thread spools
Welding / torch connectors
Dimensions (width x height x length)
Protection rating
Weight
1.1. ACCESSORIES.
GALA GAR has a complete range of welding accessories, where you can find the most suitable for your needs.
For recommended accessories, please refer to the Product Data Sheet or the General Catalogue (www.galagar.com).
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA |
(50/60hz)
1
1max
1eff
1max
1eff
MIG/MAG
2
h
MMA
2
TIG
2
) /
2
ACCORDING TO UNE-EN 60974-1 STANDARDS
NEVER USE THESE WELDING MACHINES TO DEFROST PIPES.
Accessories included as standard
Earth clamp with cable 16mm2, 3m
Electrode clamp with cable 16mm2, 3m
12140301211
10111990214
12140301221
USE ONLY RECOMMENDED SPARE PARTS AND ACCESSORIES
SMART 200 MP SYNER 110 / 220-230V
1 Ph 220-230V ±10%
41 A
26 A
9.4 kVA
6.0 kVA
IGBT INVERTER
82 %
MIG-MAG / MMA / TIG DC Lift Arc
15,5-24 V
1.5-15 m/min
25-180 A
15-200 A
60 V
200 A / 40%
160 A / 60%
125 A / 100%
Ø 200 mm / 5 kg
Dinse female 35-50mm2/ Euroconnector
225 x 345 x 460 mm
Gas tube 3m
Brush and Pickaxe
ROLLER 0.8-1.0 mm "V".
ROLLER 0.8-0.9 mm "Grooved".
ROLLER 0.8-1.0 mm "Grooved"
19/64
22300200MPS
1 Ph 110V ±10%
40 A
25 A
4.4 kVA
2.8 kVA
81 %
15,5-20 V
1.5-15 m/min
25-108 A
15-120 A
60 V
120 A / 40%
100 A / 60%
80 A / 100%
FORCED
0.8-1.0 mm
IP21S
10,2 Kg
www.galagar.com
)
2