Trevi XF 4000 DJ Mode D'emploi Et Branchement page 15

ENGLISH
CHANNEL B
1. Switch on the appliance and press the B MODE button (23) on the unit or the B/M button (33) on the remote control and select
the bluetooth function, the message "bT" will appear on the display.
2. In Bluetooth mode, the word "bT" on the display will start to flash, the system will automatically search.
3. Activate the Bluetooth functionality on the external device to be paired.
4. Start the device search. At the end select the "XF 4000DJ B" device.
5. Enter the password "0000" if required.
6. Press the (21) button on the unit or the button(38) on remote control, to start playback and use the buttons

(19) on the unit, or the keys
9
PLAY ON INPUT USB
1. Turn on the unit.
2. Insert a USB memory in the corresponding inputs: (1 for A channel), (7 for B channel). Playback starts automatically.
3. To pause playback, press the
channel), (38 for B channel) on remote control, the display will show "PAUS".
4. To resume playback, press the
(38 for B channel) on the remote control.
5. Press button (15 for channel A), (20 for channel B) on unit
:
control while listening to switch to the next track. Press the
for channel A), (34 for channel B) on remote to switch to previous tracks.
6. Using the numeric keypad(50) on remote control you can directly enter the number of the song you want to play. Press the
No/A/B button (49) on the remote control once to select channel A, press twice to select channel B; press the number keys
corresponding to the track number to be played
7. Press once REPEAT button (44 for channel A), (41 for channel B) on remote control, the display will show "ONE", to continuously
reproduce the same track; press it a second time, the word "ALL" will appear on the display, to continuously play all the tracks
contained in the USB device
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory FAT (16 or 32).
AUX-IN
1. Press the A MODE button(11) or B MODE button(23) on the unit or press A/M button(29 or B/M button(33) on the remote control
and select the "AUX" function.
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (included) to the AUX IN A channel(2) or AUX IN B
chennel(6).
3. Use the external device from their commands.
USING THE WIRED MICROPHONE (not included)
1. Connect the supplied microphone into the jack MIC1(3) or MIC2(5).
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume of the microphone input(1) and the echo effect(7) as desired using the appropriate commands.
Note: You can use two microphones simultaneously.
RECORDING
You can record both the microphone sound and B channel sound and DJ sound simultaneously.
1. A must be plugged in to enter the USB flash drive, because all the audio files will be saved to USBA(1) USB flash drive
2. Plug in a USB A and press the record key to go to record function.The screen shows 00:01 to indicate that recording has started.
If you enter a recording during USB A play back, the playing music will be stopped to save the recording file,the system will
createa folder and the speaker will save and play the recorded file automatically in this folder.
3. The USB, BT/ AUX functions of channel A and channel B operate in the same way, and the sound of A and B can be output at
the same time.
(39) and (34) for selecting tracks.
: 9
(13 for A channel), (21 for B channel) button on the unit or the button

(13 for A channel), (21 for B channel) on the unit or the button

or button (30 for channel A), (39 for channel B) on remote
:
button (14 for channel A), (19 for channel B) on unit
9
15
XF 4000 DJ
(20) o
:
(46 for A

(46 for A channel),

or (47
9