Basic Functions - Trevi XF 4000 DJ Mode D'emploi Et Branchement

ENGLISH
TRANSPORTATION
For transportation use the two side handles placed the device or the two top handles, slightly bend the device and exploit the two
rear wheels.
POWER
This unit works with rechargeable lead-acid 12V
When the battery is low or the unit will not turn on, press the power switch POWER ON/OFF(4) to "OFF", plug the power cord into
the socket (27) on the device and plug in a socket to recharge, indicator LED will light up.
States of the signaling LED indicator light Battery charging:
- LED indicator RED: the device and 'properly connected with the power cord and battery and' being charged.
- LED indicator GREEN: Charging finished, the battery is charged.
Caution: Do not connect the appliance to sockets with a voltage other than that indicated.

BASIC FUNCTIONS

POWER ON/OFF, BATTERY CHARGE
Set the main switch POWER ON/OFF (4) to "DC" to turn on and use the device with its internal battery.
Set the main switch POWER ON/OFF (4) to "OFF" to completely switch off the device or charge the battery.
Move the main switch POWER ON/OFF (4) to "AC" to turn on and use the device with 230V
STAND-BY
You can switch the system to standby mode using the button
If the appliance is plugged into a mains socket by wire 230V
- In Stand-by mode the appliance switch ON by pressing the button
ON/OFF(4) from the "AC" position to the "OFF" position, waiting for 3 seconds and then turning the switch back to the "AC"
position.
If appliance is operating battery:
- In Stand-by mode the appliance switch ON by pressing the button
ON/OFF(4) from "DC" to "OFF" position, waiting for 3 seconds and then turning the switch back to the "DC" position..
Caution:
- In standby mode the battery is NOT recharged.
- The Stand-by function works only when the main POWER ON/OFF switch (4) is in position "DC" or "AC".
- In stand-by function there is no LED indicating.
- We remember leaving the unit in stand-by function the battery discharges faster than using the POWER ON/OFF switch(4).
SELECTION OF THE FUNCTION ON CHANNEL A AND CHANNEL B
The USB, BT/AUX functions of channel A and channel B work in the same way and the sound of channel A and B can be played
simultaneously.
A CHANNEL
To change the operating mode, press the A MODE button (11) on the unit several times or press the A/M button (29) on the remote
control to select: BLUETOOTH ("BT" appears on the display), USB (only if a memory is connected to the USB socket (1), "USb"
appears for a few seconds on the display, AUX ("AUX" appears on the display).
B CHANNEL
To change the operating mode, press the B MODE button (23) on the unit several times or press the B/M button (33) on the remote
control to select: BLUETOOTH ("BT" appears on the display), USB (only if a memory is connected to the USB socket (7), "USb"
appears for a few seconds on the display, AUX ("AUX" appears on the display).
VOLUME CONTROL OF CHANNEL A AND CHANNEL B (FADING)
A CHANNEL
Raise or lower the Volume control of channel A(12) on the unit. This control used together with channel B has the FADING function
on played song.
B CHANNEL
Raise or lower the Volume control of channel B(22) on the unit. This control used together with channel A has the function FADING
, 9Ah and power supply 230V
(
51) on remote control;
50Hz:
(51) on remote control or by switching the POWER
(51) on remote control or by switching the POWER
13
XF 4000 DJ
50Hz.
50Hz power cable.