Internal Lighting; Cleaning And Maintenance - Indel B FLYINGBAR 115V Mode D'emploi

FLYING BAR 11 5V
E N E R GY SAVI N G S U G G E S TI O N Y
Ensure sufficient ventilation and shall be kept away from heat source.
•
Take items quickly after opening the door and reducing the frequency of opening.
•
Do not fill the minibar with too many items, or else the cool air circulation would be
•
affected, thus leading to higher power consumption.
Ensure the door gasket is able to fully seal the gap between the door and the body when
•
the door is closed.

INTERNAL LIGHTING

Low rated power LED light is adopted as the internal light in the minibar, it is high lumen, long
service life and energy saving. The lamp is controlled by the opening & closing of door.
WARNING!
The lamp is powered up by DC 12 V, please contact the INDEL B or authorized person in
•
the event that any default is detected.
Always wearing anti-static gloves or anti-static wrist when dismantling the lighting lamp
•
panel avoid damaging the LED by static electricity.
CLE ANIN G AND M AINTE NAN CE
CLEANING
Always disconnect the device from the power before cleaning. Soft wet cloth can be used to
wipe over the minibar thoroughly. Small quantity of neutral cleanser can also be used, then
clean the device with clean dry cloth.
WARNING!
Do not wipe with stimulating cleanser such as hot water, gasoline, alcohol, detergent or
•
high class thinner etc.
Do not spray the minibar with water directly
•
MAINTENANCE
Clean and maintain the device periodically. Do remember to disconnect to power supply
•
prior to cleaning and maintenance.
Door gasket shall be kept clean all the time in case of going moldy, and shall be free from
•
oil, and be checked regularly for any aging occurs, as to avoid poor sealing effect.
Clean the condenser at least one time every year.
•
Invite qualified staff to perform safety inspection for the electric circuit at least one time
•
every year.
FLYINGBAR 115V_05-06-2020
20