Valor LEGEND G4 Serie Instructions D'installation page 4

Reinstall the fi replace components
To reinstall the components removed for the conversion
or to complete the installation of the fi replace, see the
installation instructions supplied with the appliance.
1. Refi t the ceramic panels fi rst, then the front brick
support and the rear log support (3 screws).
2. Reinstall the grate (with logs only), the fuel bed, the
window, the front trim and the left side access door.
Fit the conversion labels
1. Fit the conversion label with new specifi cations over
the corresponding specifi cations on the data plate
attached to the fi replace at right hand side between
the fi rebox and the outer case of the appliance.
2. Fit the label "This appliance was converted on...
by..." near the data label fi tted in 1.
3. Reinstall the right side access door.
4
Designed and Manufactured by / for
Miles Industries Ltd.
190–2255 Dollarton Highway, North Vancouver, BC, CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfi replaces.com
© Copyright Miles Industries Ltd., 2012