Making Coff Ee With A Preset Time - Beem Fresh Aroma Perfect Thermostar Mode D'emploi

EN
If the brewing process is to be aborted prematurely, press the
operating status indicator
out on the display.
At the end of the brewing process, the device switches off automatically. The operating
status indicator
If the keep-hot function has been switched on beforehand, the device remains in
operation for up to 40 minutes and the operating status indicator
to be lit. fl ashes on the display as long as the keep-hot function is switched on.
More information can be found in the "Handling and Operation" chapter | "Keep-
Hot Function".
Making Coff ee with a Preset Time
To make coffee with a preset time, the clock needs to be set (see the "Handling
and Operation" chapter | "Time").
1. Prepare the coffee machine, add coffee beans or coffee powder, pour in water, insert
a fi lter and if necessary activate the aroma button and / or the keep-hot function (see
the "Handling and Operation" chapter).
2. Keep the button
status indicator
3. Use the buttons
"Handling and Operation" chapter | "Time").
4. To make coff ee with coff ee powder, press the button
status indicator
To make coff ee with coff ee beans, the button
operating status indicator
ing status indicator
5. To activate the preset time, press the button
cator lights up constantly. The preset time is activated.
Once the preset time is reached, the device switches on automatically. The display
shows the programmed settings and
indicator (18) or
If the operating status indicator
has not yet been completed, press the button
onds. The operating status indicator
resumed.
02041_DE-EN-FR-NL_A5_V1.indb 36 02041_DE-EN-FR-NL_A5_V1.indb 36
goes out, the device is switched off and
goes out and goes out on the display.
(27) pressed down for approx. 3 seconds until the operating
fl ashes.
(22) and (21) to set the start time you want (see the
is still fl ashing. The operating status indicator
is lit up, press the button
goes out.
. Depending on the setting, the operating status
lights up.
should stop fl ashing even though the setting
(20) while the operating
must be switched off. If the
until the operat-
again. The operating status indi-
again for around 3 sec-
fl ashes again and the settings can be
36
button. The
goes
continues
lights up.
(19)
03.08.2017 11:39:01 03.08.2017 11:39:01