Beem Fresh Aroma Perfect Thermostar Mode D'emploi page 41

39
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water tank (13) up to the 10-cup mark with a concentrate/water solution of no
more than 1:20 (one part concentrate to 20 parts water).
2. Use the button
3. Press the button
through.
4. Let the descaling solution take effect for a little while.
5. Use the button
6. Press the button
run through.
7. To rinse the device, allow two tankfuls (10 cups) of clear water to run through it. The
device is now descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a pro-
longed period. Clean the device again if necessary (see the "Cleaning and Care" chapter)
and let it dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
Nothing is shown
on the display (19).
02041_DE-EN-FR-NL_A5_V1.indb 39 02041_DE-EN-FR-NL_A5_V1.indb 39
(25) to set the number of cups to 2.
(20) to switch on the device. Allow the two cups to run
to set the number of cups to 8.
to switch on the device and allow the rest of the solution to
Possible cause
The mains plug is not inserted
correctly in the plug socket.
The plug socket is defective.
No mains voltage is present.
The display is defective.
Fix
Insert the mains plug.
Try another plug
socket.
Check the fuse of the mains
connection.
Contact our customer service
department.
03.08.2017 11:39:02 03.08.2017 11:39:02
EN