Philips PowerPro FC8769 Manuel D'utilisation page 15

1 To detach the filter grille, push the tab downwards (1) and pull the
grille towards you (2).
2 Pull out the Super Clean Air HEPA filter pulling the tab towards you.
3 Click the new Super Clean Air HEPA filter into place.
Note: Make sure the tab of the filter is located at the top.
4 Reattach the filter grille to the vacuum cleaner.
storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the cord.
English
15