Time/Date - Sonoro PRESTIGE SO-330 Mode D'emploi

To establish network connection.
•
[WPS WLAN Setup]
Select this option if your wireless router supports both WPS and PBC setup
methods.
•
[View Settings]
To view the current network information.
•
[WLAN Region]
To select a WLAN region.
•
[Manual Settings]
Under the [Wireless] option, select [DHCP enable] to allocate IP address
automatically or [DHCP disable] to do it manually.
•
[NetRemote PIN setup]
To set up a NetRemote PIN.
•
[Network Profile]
To display a list of networks saved by PRESTIGE.
•
[Clear Network Setting]
To clear all network settings.
•
[Keep Network Connected]
To keep the WiFi network connected or not. If [YES] is selected, this allows
you to wake PRESTIGE from standby using a remote app. If [NO] is
selected, this will switch OFF the WiFi network connection in standby mode.
19.5

Time/date

•
[Set Time/Date]
To set time and date.
•
[Auto Update]
To select a source (Radio, Internet network or no update) for automatic time
update.
•
If you are updating time from a source (Radio – FM/DAB), the daylight
saving setting has no effect.
If you are updating time from the Internet network, set your time zone.
104 © sonoro audio GmbH 2021