Publicité
Remote control - no operation
• The batteries may be exhausted. Replace the batteries.
• The batteries maybe inserted incorrectly. Refer to the
section "Inserting the Batteries into the Remote".
No signal on an input source
• It is possible that no device is connected.
• Check the AV cables and connections from your device.
• Check the device is switched on.
The Image is not centered in VGA source
To have your TV automatically center the image, enter
the PC Position menu in Picture menu, highlight
Autoposition and press OK. Wait for it to finish. In order
to set the position of the image manually you can use
H Position and V Position options. Select the desired
option and use Left and Right directional buttons on the
remote to set.
Recording unavailable
To record a programme, you should first correctly connect
a USB storage device to your TV, while the TV is switched
off. You should then switch on the TV to enable recording
feature. If you cannot record, check the storage device is
correctly formatted and there is sufficient space.
USB is too slow
If a "USB disk writing speed too slow to record" message
is displayed on the screen while starting a recording, try
restarting the recording. If you still get the same error,
it is possible that your USB storage device does not
meet the speed requirements. Try using a different USB
storage device.
PC Input Typical Display Modes
The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.
Index
Resolution
1
640x480
2
800x600
3
800x600
4
1024x768
5
1024x768
6
1280x768
7
1280x960
8
1280x1024
9
1360x768
10
1400x1050
11
1600x1200
12
1920x1080
AV and HDMI Signal Compatibility
Source
EXT
(SCART)
Side AV
PC/YPbPr
HDMI
(X: Not Available, O: Available)
In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.
Frequency
60 Hz
56 Hz
60 Hz
60 Hz
66 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
English - 20 -
Supported Signals
PAL 50/60
NTSC 60
RGB 50
RGB 60
PAL 50/60
NTSC 60
480I, 480P
60Hz
576I, 576P
50Hz
720P
50Hz,60Hz
1080I
50Hz,60Hz
1080P
50Hz,60Hz
480I
60Hz
480P
60Hz
576I, 576P
50Hz
720P
50Hz,60Hz
1080I
50Hz,60Hz
24Hz, 25Hz
1080P
30Hz, 50Hz,
60Hz
Available
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Publicité
