Télécharger Imprimer la page

Telefunken MWRC20G Mode D'emploi page 37

Publicité

5
OPERATION OF CONTROL PANEL
CAUTION:
The temperature of food before
cooking would be 20-25 °C. Higher
or lower temperature of the food
before cooking would require
A
increase or decrease of cooking
time.
The temperature, weight and shape
of food will largely influence the
cooking effect. If any deviation has
been found to the factor noted on
above menu, you can adjust the
cooking time for best result.
Example: Steam 0.45kg fish
Steps
1
After power-up, the
colon flashes
2
Turn Cuisson
Automatique /
Temps.Poids (Auto
Cooking/ Time.
Weight) knob to set
the cooking menu
3
Start cooking by
pressing Démarrer
(Start) button, and
LED will count down to
show running time.
11. Automatic Starting
(Delayed Function)
If you do not want the menu be started
immediately, you can preset the cooking menu and
time and the preset menu will be automatically
started at your set time. The setting will consist of
2 steps:
• Setting the current clock;
• Setting the cooking menu and time.
Example: Now it is 12:30 clock, if you hope that the
microwave oven will automatically start cooking
with 100P microwave power for 9 minutes and 30
seconds at 14:20
1
1.1
1.2
1.3
1.4
Display
:
A.8
1.5
2
2.1
2.2
2.3
3
4
5
Steps
After power-up, the colon flashes
Press Horloge (Pre-set/Clock)
button
Set hours by turning Cuisson
Automatique / Temps.Poids
(Auto Cooking/ Time. Weight)
knob
Press Horloge (Pre-set/Clock)
button again to confirm hours
Set minutes by turning Cuisson
Automatique / Temps.Poids
(Auto Cooking/ Time. Weight)
knob
Press Horloge (Pre-set/Clock)
button once or waiting for 5
seconds, and the numbers will go
steady.
Set the cooking menu and time
Select cooking power by pressing
Puissance (Power) button
Turn Cuisson Automatique /
Temps.Poids (Auto Cooking/
Time. Weight) knob to set cooking
time
Press and hold Horloge (Pre-set/
Clock) button for 3 seconds to
return to current clock.
Set the time you expect to start.
Repeat the steps of 1.2, 1.3, 1.4
Press Horloge (Pre-set/Clock)
button to confirm the delayed
menu. Now the program has been
activated. And the menu will be
started at 14:20.
You may check the preset starting
time by pressing Horloge (Pre-set/
Clock) button.
Display
:
00:00
12:00
12:00
12:30
12:30
100P
9:30
37 / 42 EN

Publicité

loading