Publicité
Using the radio in scan mode
x To activate scan mode, press SCN DUAL.
x You must have at least two channels in memory to start
a scan.
x You cannot transmit while in scan mode.
x To save a channel into memory, select the channel,
then press the MEM SOS key. The MEM icon displays
whenever you tune to that channel.
x To remove a channel from memory, set the radio to that
channel, then press the MEM SOS key. The MEM icon
no longer displays.
x When the radio stays on a channel, press
channel and resume scanning.
x Pressing 16/9 TRI while in Scan mode pauses scanning
and immediately goes to emergency channel 16. Press
again to go to channel 9. Press a third time to resume
scanning.
x To end the scan, press the SCN DUAL key again; the
radio remains on the last scanned channel.
# E
ty
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in scan mode, the
radio checks the most recently-used weather channel every
seven seconds, then continues scanning the next channel in
memory:
Memory Channel Scan
08
10
11
12
13
Every few seconds, the radio
checks the last-used weather
channel, then scans the next
channel.
Uniden Atlantis 275 Radio Owner's Manual
to leave that
14
15
17
20
24
WX Alert
Watch on
wx
25
E-11
Publicité
