Publicité
Normal mode with Triple Watch or Dual Watch
If you activate Triple Watch while operating in normal mode,
the radio checks channels 9 and 16 every two seconds
and then returns to the current MRN or WX channel; with
'XDO :DWFK WXUQHG RQ WKH UDGLR RQO\ FKHFNV FKDQQHO
before returning to the current MRN or WX channel. The
radio will not check channels 9 or 16 while you are actively
WUDQVPLWWLQJ LW ZDLWV XQWLO \RXU WUDQVPLVVLRQ LV ¿QLVKHG DQG
then checks the channels.
Monitoring Channel 25
16
09
Every few seconds, the radio
checks channels 16 & 9.
Triple Watch on
SCAN MODE OPERATION
You can save channels into memory and then use scan
mode to monitor those channels from lowest to highest. If the
radio detects a signal on a channel, it stays on that channel
as long as the signal is received; when the signal stops, the
radio continues scanning.
When it detects a signal, the radio stays
on the channel until you press the
button or the signal stops.
08
10
11
12
The radio scans about
5 channels in 0.5 seconds.
E-10
Uniden Atlantis 275 Radio Owner's Manual
16
16
09
09
or
Resume
scan
13
14
15
17
Publicité
