Publicité
LA 18I-MU
Type and order code
2
8
Heat output COP
8.1
Heat output / COP
1. For air temperatures between -22°C and -5°C, flow temperature increasing from 45? to 60?.
2. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, other parameters, in
particular the defrosting capacity and regulation, should also be taken into consideration. These figures are only achieved with clean heat exchangers. Instructions for care,
commissioning and operation can be found in the relevant sections of the installation and operation instructions. The specified values have the following meaning, e.g. A7/
W35: outside air temperature 7 °C and heating water flow temperature 35 °C.
3. The heat output and COP is reduced by approx. 5 % in lower operation
4. The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
5. See CE declaration of conformity
6. The heat circulating pump and the heat pump manager must always be ready for operation.
www.gdts.one
Performance level
at A-7 / W35
kW / ---
at A2 / W35
min
kW / ---
at A2 / W35
max
kW / ---
at A7 / W35
kW / ---
452168.66.09 · FD 9912
English
LA 18I-MU
EN 14511
9.4 / 2.9
5.9 / 3.7
7.9 / 3.6
5.7 / 4.6
EN-11
Publicité
