Publicité
Plug the Power Supply & Attach the Seat │ 12
1. Fit the tabs on the seat back
into the holes in the vehicle
body.
2. Insert and tighten two Ø4x12
screws with a screwdriver .
3. Plug the red vehicle connector into the red connector on the battery.
4. Fit the seat to the vehicle body.
5. Use a screwdriver to tighten the both M5x16 screws at the top of the seat into the
holes in the vehicle.
Red to red
3
1
2
4
Tabs on seat back
Tabs on seat back
5
Publicité
