Publicité
Rear Bottom View
2
4
3
8
1. Cut off the plastic tie on the both rear gear boxes with scissors. Remove all the parts from the
rear axle. Insert the rear axle through the hole in the vehicle body, when inserting it half way,
lift the another gear box so that the rear axle can go through it and protrude out. Make sure
that the rear axle is centered with left and right ends exposed the same distance outside of the
vehicle body.
2. Fit a rear wheel onto the rear axle.
3. Slide a Ø12 washer onto the rear axle.
4. Tighten a locknut to the end of the rear axle with a spanner (included).
5-7. Repeat steps 2-4 to assemble the other rear wheel. HINT: An extra spanner has been
provided to hold the Lock nut on the other side of the rear axle while tightening the lock nut on
the other side.
8. Snap the hubcaps to the wheels.
Attach the Rear Wheels │ 8
Rear Bottom View
1
6
5
8
7
Publicité
