Pit Boss PB757GS Guide D'assemblage page 5

5. INSTALLING THE SIDE SHELVES
Parts Required:
2 x Side Shelf (#5)
8 x Screw (#C)
Installation:
• From the outside going inwards, thread one Screw into the top hole of
each of the four Side Shelf Brackets. Note illustration 5A.
• Mount a Side Shelf to one side of the Firebox by hooking onto the Side
Shelf Brackets then pushing down to set in place. Note illustration 5B.
• Lock the Side Shelf into place threading one final Screw into the
bottom hole of each shelf. This Screw can be installed in either Side
Shelf Bracket A or Side Shelf B. Note illustration 5C.
NOTE: The other bottom hole on the Side Shelf will remain unused.
• Repeat same installation for the other Side Shelf on the opposite side
of the Firebox.
6. PLACING THE GREASE CUP
Parts Required:
1 x Grease Cup (#2)
Installation:
• On the front of the unit, place the Grease Cup into the Grease Cup
housing, as shown in the illustration.
5A
7
6
5B
5C
C
6
2
C
5