Publicité
Problem
and a number come on.
comes on.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the corner of the
All manuals and user guides at all-guides.com
Possible cause
There is an error in the hob.
There is an error in the hob because
a cookware boiled dry. Automatic
Switch Off and the overheating pro-
tection for the zones operate.
Disconnect the hob from the electri-
cal supply for some time. Discon-
nect the fuse from the electrical sys-
tem of the house. Connect it again.
If
Authorised Service Centre.
Deactivate the hob. Remove the hot
cookware. After approximately 30
seconds, activate the zone again. If
the cookware was the problem, the
error message goes out. Residual
heat indicator can stay on. Let the
cookware become sufficiently cool.
Check if your cookware is compati-
ble with the hob.
Refer to "Hints and tips" chapter.
glass surface) and an error message that comes on.
Make sure, you operated the hob correctly. If not the
servicing by a service technician or dealer will not be
free of charge, also during the warranty period. The
instructions about the Service Centre and conditions of
guarantee are in the guarantee booklet.
Remedy
comes on again, speak to an
27
Publicité
