Modelling Light („Ml"); Extended Zoom Mode („Ex") - Metz MECABLITZ 50 AF-1 Mode D'emploi

Masquer les pouces Voir aussi pour MECABLITZ 50 AF-1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
9.5 Modelling light („ML")
The modelling light is a high-frequency stroboscopic flash. It creates the impres-
sion of a semi-permanent light for a duration of about 3 seconds. The modelling
light enables the user to assess light distribution and the formation of shadows
before taking pictures. The modelling light is triggered with the manual firing
button
.
Setting procedure
ML
OFF
ML
On
On
ML
– When „ML ON" is displayed, the modelling
– When „ML OFF" is displayed, the modelling light is
deactivated.
The setting takes effect immediately.
After about five seconds the display stops flashing and the setting is saved auto-
matically.
After activation of the modelling light function „ML" appears in the display.
• Press the button combination „Select"
until „ML" flashes in the display.
• Apply the setting desired with the
buttons + and —.
light is activated.
9.6 Extended Zoom Mode („Ex")
In extended zoom mode the zoom position of the main reflector
one level below the focal length of the camera lens. The resulting expanded and
broader light coverage provides additional dispersed light (reflections) inside
rooms so that a softer flash illumination is possible.
Example:
The focal length of the camera lens is 50 mm. The extended zoom mode sets a
35 mm reflector position on the flash unit. However, 50 mm continues to be
shown on the display.
Setting procedure
• Press the button combination „Select"
until „Ex" appears flashing.
• Apply the setting desired with the buttons + and —.
– When „Ex On" is displayed, the extended zoom mode is activated.
– When „Ex OFF" is displayed, the exten-
ded zoom mode is deactivated.
The setting takes effect immediately.
After about five seconds the display stops flashing and
the setting is saved automatically.
After activation of the extended zoom mode „Ex"
appears in the display.
Depending on the system, the extended zoom mode is supported for lens
focal lengths of 28 mm or more (35mm format). The camera must be
equipped with a CPU lens and be able to transfer data on the lens focal
length to the flash unit.
is reduced to
Ex
OFF
Ex
On
On
Ex
105

Publicité

Table des Matières
loading

Table des Matières