Publicité
STEP 1 - ASSEMBLING THE BRACKETS
Note: A RH (Right Hand) installation will require the electrical enclosure to be flipped, placing the exiting low voltage wire
closer to the upper bracket.
1. Orient one of the mounting brackets [210-1709] (as shown) ensuring that the electrical access screws on the electrical enclosure
[205-3176] are pointed toward the front of the cabinet.
2. Attach the included electrical enclosure [205-3176] to the bracket using the supplied #8 screws [SS344] and lockwashers [203-1068].
LH Installation
SS344
203-1068
210-1709
Electrical
access screws
205-3176
Electrical
access screws
Low voltage wire
connection
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation or Assembly Instructions
All manuals and user guides at all-guides.com
Tabs always face
cabinet box
5
RH Installation
SS344
203-1068
Tabs always face
cabinet box
Electrical
access screws
205-3176
Electrical
access screws
210-1709
Low voltage wire
connection
Part no. 209-1329 rev. 03/25/20
Vesper Midline / Outline Light
Publicité
