Publicité
STEP 5 - FINAL ASSEMBLY
1. Using the Electrical access screws [203-1159], lockwashers [203-1525], and Electrical Enclosure Cover set aside in step 3, close the
Electrical Enclosure.
Note: Leaving too much Field Wire in the enclosure could prevent it from closing properly and may cause damage to the internal
components.
2. Using the provided #8 screws [203-1497] attach a button receiver [211-1362] to each bracket. The arrow on the button receiver must
be pointed up.
1
203-1525
203-1159
Electrical
access
screws
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation or Assembly Instructions
All manuals and user guides at all-guides.com
2
11
211-1362
203-1497
211-1362
203-1497
Part no. 209-1329 rev. 03/25/20
Vesper Midline / Outline Light
Publicité
