Publicité
STEP 5 - FINAL ASSEMBLY
3. Connect the electrical connector from the light to the electrical low voltage wire connector coming out of the electrical enclosure.
4. Align and insert the buttons on the back of the light into the upper and lower button receivers [211-1362].
5. Slide the light down until it's completely engaged. Lights will appear to be loose because the brackets are not tight (left loose in
Step 2 Mounting the Brackets to the Cabinet).
3
4
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation or Assembly Instructions
All manuals and user guides at all-guides.com
Surface Mount
Button
[211-1351]
Recess Mount
12
Part no. 209-1329 rev. 03/25/20
Vesper Midline / Outline Light
Publicité
