Publicité
STEP 5 - FINAL ASSEMBLY
6. Adjust the light vertically until it's flush with the top and bottom of the cabinet box.
7. Tighten the mounting screws [SS676] inside the cabinets to complete the light installation.
8. Adjust the cabinet doors until they align with the lights using the three-way adjustment features in the hinges, adjusted using a #2
Phillips Head screwdriver.
8A. Height: With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and down.
8B. Side to Side/Depth: With the hinge fully extended, you can access the front and back screws. The front screw will adjust the door
from side to side and the rear screw will adjust the door's depth.
9. Press a Screw Cap [SS672], provided with each light, onto all exposed screw heads.
10. Press a Hole Plug [SS134], included with your cabinet hardware, into all open mounting holes.
8A
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation or Assembly Instructions
All manuals and user guides at all-guides.com
8B
Surface Mount
SS134
SS672
SS672
SS134
Recess Mount
13
SS672
SS672
Part no. 209-1329 rev. 03/25/20
Vesper Midline / Outline Light
Publicité
