Publicité
The operation of any snow blower can result in foreign objects being thrown into the eyes,which can
result in severe eye damage. Always wear safety glasses or eye shields before beginning snow blower
Operation. We recommend standard safety glasses or Wide Vision Safety Mask for over spectacles.
SNOW BLOWER OPERATION
The most effective use of the snow blower will be established
by experience, taking into consideration the terrain, wind
conditions and building location which will determine the
direction of the discharge chute.
NOTE: Do not blow snow towards a building as hidden
objects could be blown with sufficient force to cause
damage.
TO STOP YOUR SNOW THROWER
1. To stop throwing snow, release the auger drive lever.
See Figure 14.
2. To stop the wheels, release the traction drive lever.
3. To stop the engine, push the throttle control lever to off
and pull out the ignition key.
TO CONTROL SNOW DISCHARGE
1. Move the electric chute switch to set the direction (left
to right) of the snow throwing.
2. Push the remote chute lever forward to discharge the
snow high and far. Pull the remote chute lever back to
discharge the snow down.
HOW TO MOVE FORWARD AND BACKWARD
1. To move the snow thrower forward, engage the traction
drive lever (left hand). As the snow thrower starts to
move forward, push the shift lever to the desired speed.
Maintain a firm hold on the handles and guide the snow
thrower along the clearing path. Do not attempt to push
the snow thrower.
2. To move the snow thrower backward, pull the shift lever
to the reverse position.
TO THROW SNOW
1. Push down the auger driver lever (right hand). See
Figure 14.
2. Release to stop throwing snow.
1741078
All manuals and user guides at all-guides.com
OPERATION
NOTE:
recommended that the ground speed of the unit be
reduced, maintain full throttle and do not attempt to clear
the full width of the unit.
For additional operating instructions see "Operating Tips" in this
section of the manual.
IMPORTANT: Be sure front of unit is clear of bystanders
or obstacles before operating.
Never operate the snow blower without all guards, cov-
ers, and shields in place.
Never direct discharge towards windows or allow by-
standers near machine while engine is running.
Stop the engine whenever leaving the operating posi-
tion.
Disconnect spark plug before unclogging the impeller
housing or the discharge chute and before making re-
pairs or adjustments.
When leaving the machine, remove the ignition key.
To reduce the risk of fire, keep the machine clean and
free from spilled gas, oil and debris.
16
When
clearing
WARNING: Read Owner's Manual before oper-
ating machine. This machine can be dangerous
if used carelessly.
Shift Lever
Auger Drive Lever
wet,
heavy
snow,
it
Traction Drive Lever
Remote Chute Lever
Electric Chute
Switch
Figure 15
is
Publicité
