Publicité
sound pressure from earphones and headphones can cause hearing loss. The
turntable speakers will not operate when earphones are fitted.
Connecting the turntable to external speaker
In connecting the turntable to external speakers (via a suitable amplifier)
Use a twin phono to twin phono lead (not included) to connect the RCA output jacks
to the Audio in of the amplifier. Ensure red plugs are inserted into the red sockets
and white into white.
Using with Bluetooth device
Check that your turntable is in Bluetooth mode. If you are not already in Bluetooth mode, short
press the Mode button until you are in Bluetooth mode (Blue LED will be illuminated). It will
begin to search for Bluetooth devices (Blue LED flashed during pairing).
In Bluetooth Mode:
1. Your device will search for Bluetooth.
2. On the device (e.g. iPhone/iPad/Android/other phone/Tablet/ Computer), turn on Bluetooth
connectivity and ensure that it is 'discoverable'.
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to 'Add new device', if necessary.
Note: Some products will automatically search for a new device and so the 'Add new device'
option is not available.
4. When found, your device will be displayed as 'Lenco TT-120'. Select and begin pairing.
5. When pairing is complete 'Bluetooth Connected' will be displayed.
6. Now that you have paired your device with the turntable, it will connect to it when it is
within range, which is about 10 meter or less (33 feet or less), line of sight.
7. Your device will remain paired with the turntable unless you decide to disconnect or
'unpair' it.
8. You can short press "Pair" to reconnect.
Playing Bluetooth
1. Press "Back" for previous track of your Bluetooth device.
2. Press "Next" for next track of your Bluetooth device.
3. Press "Play/ pause" for play or pause of your Bluetooth device.
Charging the TT-120
Insert a charging cable into the DC 5V socket at the back panel. The red led indicator
will light. Charging can take up to 2 hours. When the battery is fully charged, the led
indicator will go OFF. When battery is low, The mode LED(24) will blink.
All manuals and user guides at all-guides.com
9
Publicité
