Nordpeis N-27 Manuel D'utilisation page 21

Assembly of the Thermotte plates
Start by placing the insulation in the bottom. Add the two bottom plates and then continue with the left and right
side plates. Pull both side plates as far forward as possible and insert the back plate behind the side plates. Push
back the side plates into position.
1
Prior to positioning the smoke
baffle on top of the hearth
surround's sides The diffuser
must be positioned up inside the
insert's heat exchanger, the dif-
fuser must rest against the front
edge of the heat exchanger, at
the rear edge there are hooks
that fit into the diffuser.
7
Smoke baffle.
2
6
8
Position the ash-pan and
castiron grate.
GB
3
4
5
9
21