Publicité
V1.2
1,000 LB HYDRAULIC/PNEUMATIC MOTORCYCLE LIFT
4. Do not attempt to move the load while on the lift. The lift
must only be used in a static position for lifting and lowering
loads. Ensure that the load remains stable at all times.
5.
Make sure there is enough clearance around the lift and the
load for the movement of raising and lowering.
6.
Lower the load slowly to prevent dynamic load shock to
the pump.
7.
Do not place your hands between the moving components.
8.
Do not place any part of your body beneath the lift while
working on the vehicle.
9.
Inspect the tool before each use. DO NOT use if bent,
broken, cracked, leaking or otherwise damaged, any
suspect parts are noticed or it has been subjected to a
shock load.
10. The lift is designed to temporarily support the load. Do not
use for long term support of the load.
11. Follow the precautions for the air source used with the pump.
HYDRAULIC PRECAUTIONS
DANGER! Seek immediate medical attention if hydraulic fluid
under pressure penetrates your skin. See Injection Injury
precautions for instructions before using a pressurized
hydraulic system.
1.
Do not touch or handle hydraulic hoses or components
while under pressure. Hydraulic fluid escaping under
pressure has sufficient force to penetrate your clothing and
skin. A pinpoint hole may inject hydraulic fluid into your
body. Seek immediate medical attention if this occurs (see
Injection Injury).
2.
Never exceed the hydraulic system's load capacity
(see Specifications).
3.
Do not adjust the hydraulic system's relief setting. The
settings are preset by the factory.
Visit www.princessauto.com for more information
8667784
5
Publicité
