Publicité
8667784
1,000 LB HYDRAULIC/PNEUMATIC MOTORCYCLE LIFT
8.1 Tighten the speed control valve on the hydraulic pump
(N) clockwise to slow the descent speed. Turn the valve
counterclockwise to increase the descent speed.
9.
Remove the tie down straps and pull the motorcycle/dirt
bike free of the wheel chock. Walk the vehicle off the
platform and ramp.
10. To store the lift, turn the lock bolts (H) until the casters
touch the ground.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4. Keep the tool handles clean, dry and free from oil/grease at
all times.
5.
Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
LUBRICATION
Inspect and lubricate the tool when required. Lubricate
mechanical parts of the lift like the foot or release pedal with
heavy oil or grease.
AIR TOOL LUBRICATION
NOTICE! Only use air tool oil to lubricate the pump. Other
lubricants are not suitable and will damage the pump or
cause a malfunction during use.
10
For technical questions call 1-800-665-8685
V1.2
Publicité
