Publicité
8667784
1,000 LB HYDRAULIC/PNEUMATIC MOTORCYCLE LIFT
1,000 LB HYDRAULIC/
PNEUMATIC MOTORCYCLE LIFT
SPECIFICATIONS
Material
Lifting Capacity
Max. Lifting Height
Min. Lifting Height
Pump Pressure Range
Platform Dimensions
INTRODUCTION
The 1,000 lb Pneumatic/Hydraulic Motorcycle Lift is a platform
with a wheel chock and removable rear plate specifically designed
to support a motorcycle or dirt bike. Use the lift for cleaning or
vehicle maintenance. Hook the lift up to an air source for quick
lifting or use the anti-slip foot pedal to manually raise the vehicle.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this
manual. A notice is an alert that there is a possibility of property
damage, injury or death if certain instructions are not followed.
2
Steel Construction
1,000 lb
30-1/2 in.
7 in.
90 to 120 PSI
26-3/4 x 86-1/2 in.
For technical questions call 1-800-665-8685
V1.2
Publicité
