Disposal And Recycling - Ayce AGS 10,8 LI 100-190 Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To ensure constant exact cutting it is also important to remove grass remnants
and dirt from between the upper and lower blade.
Caution!
Never clean the tool under running water - and particularly never with high
pressure - because of the potential danger to persons and property. Keep your
cordless grass cutter and hedge trimmer in a dry and frost-proof place. Choose
a place that children are unable to enter.
8.2 Maintenance
To achieve good results you should keep the blades sharp at all times. In par-
ticular we recommend that you immediately level off any jags or ridges caused
by stones or the like. The tool should be thoroughly cleaned both before and
after use.
There are no parts inside the equipment which require additional maintenance.

9. DISPOSAL AND RECYCLING

The unit is supplied in packaging to prevent its being damaged in transit. This pa-
ckaging is raw material and can therefore be reused or can be returned to the raw
material system.
The unit and its accessories are made of various types of material, such as metal
and plastic. Defective components must be disposed of as special waste. Ask your
dealer or your local council.
The reprinting or reproduction by any other means, in whole or in part, of docu-
mentation and papers accompanying products is permitted only with the express
consent of the iSC GmbH.
Subject to technical changes
Anl_AGS_10_8_Li.indd 83
Anl_AGS_10_8_Li.indd 83
GB
82 I 83
02.12.15 13:33
02.12.15 13:33

Publicité

Table des Matières
loading

Table des Matières