Ayce AGS 10,8 LI 100-190 Mode D'emploi D'origine page 71

when it is switched on, this can lead to accidents.
d) Remove keys and wrenches before switching on the electric tool. A tool or
key which comes into contact with rotating parts of the appliance can lead to
injuries.
e) Avoid abnormal working postures. Make sure you stand squarely and keep
your balance at all times. In this way, you can control the electric tool better in
unexpected circumstances.
f) Wear suitable work clothes. Do not wear loose clothing or jewellery. Keep
hair, clothes and gloves away from moving parts. Loose clothing, jewellery or
long hair can get trapped in moving parts.
g) If vacuuming devices and draining devices can be fitted, make sure that these
are correctly attached and correctly used. The use of a dust extraction system
can reduce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the correct tool for your work. You will be
able to work better and more safely within the given performance boundaries.
b) Do not use an electric tool with a defective switch. An electric tool that cannot
be switched on or off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the battery before making any
adjustments to the appliance, changing accessories or put the appliance
down. This safety measure prevents starting the electric tool unintentionally.
d) Keep unused electric tools out of the reach of children. Do not allow people
who are not familiar with the appliance or who have not read these instruc-
tions to use the appliance. Electric tools are dangerous if they are used by
inexperienced people.
e) Clean your electric tool carefully. Check whether moving parts are func-
tioning properly and not jamming, whether parts are broken or damaged
enough that the functioning of this electric tool is affected. Have damaged
parts repaired before using the appliance. Many accidents are caused by bad-
ly maintained electric tools.
f) Keep your cutting tools sharp and clean. Carefully maintained cutting tools
with sharp cutting edges will jam less and are easier to control.
g) Make sure to use electric tools, accessories, attachments, etc. in accordance
with these instructions. Take the conditions in your work area and the job in
hand into account. Using electric tools for any purpose other than the one for
which they are intended can lead to dangerous situations.
Anl_AGS_10_8_Li.indd 71 Anl_AGS_10_8_Li.indd 71
GB
70 I 71
02.12.15 13:32 02.12.15 13:32