Cutting Grass - Ayce AGS 10,8 LI 100-190 Mode D'emploi D'origine

7. OPERATION
The area to be cut must first be cleared of stones and other solid objects. The sa-
fety lock-off (Fig. 1/Item 3) prevents the tool being started unintentionally. Activate
the safety lock-off (Figure 1 / Item 3) by pushing it forward and pressing the ON/
OFF switch (Figure 1 Item 4) at the same time. To switch off the tool, let go of the
ON/OFF switch (Figure 1 / Item 4).
1

7.1 Cutting grass

Allow the grass cutter to glide above the ground. The best results are achieved
when the lawn is dry.
When you notice a drop in cutting performance, re-charge the tool immediately so
that the battery does not become fully discharged.
7.2 Trimming hedges
The tool can be used to trim small hedges and shrubs.
Hold the tool slightly tilted in relation to the hedge you want to cut.
First cut the sides from the bottom up, then cut the top.
Watch out for foreign objects in or on the hedge which could damage the blades.
When is the best time to trim hedges?
Anl_AGS_10_8_Li.indd 80 Anl_AGS_10_8_Li.indd 80
1
12
3 4
02.12.15 13:32 02.12.15 13:32