Proper Use; Before Starting The Equipment - Ayce AGS 10,8 LI 100-190 Mode D'emploi D'origine

5. PROPER USE

The equipment is designed for cutting the edges of lawns and small areas of grass
in private and hobby gardens.
Tools for private and hobby gardens are not suitable for use in public facilities,
parks and sport centers, along roadways, on farms or in the forestry sector. For
the tool to be used properly it is imperative to follow the instructions set out in the
manufacturer's directions for use.
Warning! It is prohibited to use the tool to chop material for composting because
of the potential danger to persons and property.
The machine is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for equivalent purposes.

6. BEFORE STARTING THE EQUIPMENT

6.1 Charging the battery pack (Figure 2, 3)
•
Connect the charger to the charging station (Figure 2).
•
Check that your mains voltage is the same as that marked on the rating plate
of the battery charger. Plug the battery charger in a socket-outlet. The red
LED (Figure 3 / Item 1) comes on to indicate that charging voltage is available.
•
The battery pack is being charged. An empty battery pack requires a maxi-
mum charging period of 2 hours. The temperature of the battery pack may rise
slightly during the charging operation. This is normal.
•
As soon as battery pack is fully charged, the red LED (Fig. 3/Item 1) extingu-
ishes
Anl_AGS_10_8_Li.indd 78 Anl_AGS_10_8_Li.indd 78 02.12.15 13:32 02.12.15 13:32