Publicité
1. Power on the transmitter.
3. Do a test of the transmitter's control of the vehicle with
the vehicle's wheels off the ground.
All manuals and user guides at all-guides.com
GETTING STARTED
2. Connect the battery to the Electronic Speed Control (ESC) /
Receiver unit and power on the vehicle.
4. Start driving slowly. If the wheels are not straight, adjust the
steering trim dial on the transmitter.
TIP: Seat the motor brushes by driving smoothly on a flat surface
during use of the first battery charge. Properly seating the motor
brushes will increase the life and performance of the motor.
INSTALLING THE VEHICLE BODY
RUCKUS
®
4WD
EN
ON
7
Publicité
