Publicité
Setting mode
8.5
P3: Unit "Flow velocity
and temperature "
Fig. 23: Setting mode - Unit
8.6
P4: Unit "Volume flow "
Fig. 24: Setting mode - Unit
42
NOTE!
To switch between the view for setting the width
and length, you can also press the ESC/L-W but-
ton.
Press the ▼ or ▲ button to select P3 (if not
•
already selected):
The following options are available::
Metric: m/s, cm and °C
Imperial: ft/m, inch and °F
•
Press the SET button to switch between the
metric and imperial unit systems.
Press the REC button to confirm the selected
•
unit.
The device now automatically switches to P4
mode.
Press the ▼ or ▲ button to select P4 (if not
•
already selected):
The following options are available:
m
3
/m, m
3
/h, cfm, l/s
Press the SET button to switch between the
•
units.
•
Press the REC button to confirm the selected
unit.
The device now automatically switches to P1
•
mode.
Press the ESC button to return to normal
•
measuring mode.
Publicité
