Publicité
Fig. 19: Mean value measurement (time)
7.2
Point averaging
(network measurement)
●
Fig. 20: Mean value measurement (point)
During the average value measurement (time),
the top line shows the elapsed time and the bot-
tom line shows the average value.
Press the MODE button to switch between the
measurement parameters.
For network measurements in air ducts, the de-
vice can record the measured values of the indi-
vidual measuring points and automatically calcu-
late the average value. The average value is
shown directly on the display.
Press the AVG button twice to switch to aver-
•
age value mode (point).
A dot icon appears on the display.
Press the REC button to record your measur-
•
ing point.
Press the AVG button to return to normal
•
measuring mode.
During the average value measurement (point),
the top line shows the number of measurement
points recorded and the bottom line shows the
average value.
Press the MODE button to switch between the
measurement parameters.
Mean value measurement
39
Publicité
