Publicité
5.1
Batteries
5.2
Alignment of the probe
in the pipe
Fig. 15: Leakage detection on the win-
dow frame
Insert 4 AAA 1.5 V batteries.
•
The battery compartment is located on the back of
the device.
When the battery voltage is low, a battery symbol
appears on the left-hand side of the display.
In this case, insert new batteries.
•
•
To carry out a flow measurement, remove the
protective cap from the probe tip.
Pull the telescopic rod to the required length
•
NOTE!
To measure in the pipe, straighten the gooseneck
of the probe head.
•
For leakage detection, e.g. on a window or
door frame, align the gooseneck of the probe
head individually.
Preparation for operation
35
Publicité
