Publicité
Switch (fi g. 1)
To turn the light on, press the switch (a). To turn it off, press the switch
again.
Battery Indicator
As the battery nears a fully discharged state, the flashlight will blink
twice and then the brightness of the light will drop below the normal
level. This cycle will repeat for a period of up to 15 minutes until the
battery is fully discharged.
MAINTENANCE
Your D
WALT tool has been designed to operate over a long period of
E
time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
The charger and battery pack are not serviceable. There are no
serviceable parts inside.
• Do not attempt to repair the flashlight. To assure product safety
and reliability, repairs, maintenance, and adjustments should be
performed by authorized D
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
WALT service centers.
E
E NGLI SH
53
Publicité
