Safety Instructions - GBC COILBIND C200 Mode D'emploi

COILBINDC200
Set up
• Unpack carefully and place the CoilBind C200 on a flat surface,
ideally 74cm from the floor. When lifting the machine, lift from the bottom.
Do not carry the machine by the handle.
• Locate the C200 near to an electric socket.
• Follow all warnings and instructions marked on the product.

Safety instructions

Your safety as well as the safety of others is important to GBC. To guard against
injury, the following basic safety precautions must be observed in the set-up
and use of this product.
• Please use the CoilBind C200 only for its intended purpose of punching and
binding paper and covers according to the indicated specifications.
• Do not place anything in the punch opening of the machine other than paper
and covers, or plastic coils upon the rollers.
• The CoilBind C200 must be connected to the power source with a Class 2
Power Unit rated: Input 220-240 ~ 50Hz.,12VA; Output 9V
500mA.
• Unplug the CoilBind C200 before moving it, or when it is not in use for an
extended period of time.
• Do not operate with a damaged power unit supply cord or plug, after it
malfunctions, or after it has been damaged in any manner.
• Do not overload electrical outlets beyond their capacity as this can result
in fire or electrical shock.
• Do not alter the attachment plug. The plug is configured for the appropriate
electrical supply.
Service
Do not attempt to service or repair the CoilBind C200 yourself. Unplug the unit
and contact an GBC or an authorized GBC distributor for any repairs.
Power unit selection
This product is intended to be supplied by an approved Class 2 power unit
rated: Input 220-230v ~ 50Hz., 12VA; output 9V
500mA.
Guarantee
Operation of this machine is guaranteed for one year from date of purchase,
subject to normal use. Within the guarantee period, GBC will at its own
discretion either repair or replace the defective machine free of charge. Defects
due to misuse or use for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required. Repairs or alterations
• The unit is intended for indoor use only.
• Do not spill liquid of any kind on this product.
• Do not operate if the product has been exposed to rain or water.
(DC),
The following symbols appear on this product,
and their meaning is as follows:
(DC),
made by persons not authorised by GBC will invalidate the guarantee.
It is our aim to ensure that our products perform to the specifications stated.
This guarantee does not affect the legal rights which consumers have under
applicable national legislation governing the sale of goods.
Warning: For your protection, do not connect the CoilBind C200
to electrical power until you have read these instructions
completely. Keep these instructions in a convenient
location for future reference.
CAUTION: THE POWER RECEPTACLE MUST BE LOCATED NEAR
THE EQUIPMENT AND BE EASILY ACCESSIBLE.
CAUTION: IN EMERGENCY, USE THE POWER CORD AS A MAIN
DISCONNECT DEVICE!
CAUTION: Unplug this product before cleaning.
Wipe exterior only with a damp cloth.
Do not use detergents or solvents.
Off Power